PDA

View Full Version : Rear brake differences


Moe2005
07-10-2006, 08:48 PM
What are the differences of the rear disc brakes on the different trim levels of the DA integra (GS-R, GS, LS, etc.)?
Volume 8
07-10-2006, 08:50 PM
they're all the same.
Moe2005
07-10-2006, 08:51 PM
OK, thanks. Just wanted to make sure.
Volume 8
07-10-2006, 08:55 PM
no problem, doing a rear swap?
Moe2005
07-10-2006, 10:47 PM
yeah, I went to the U-pick junkyard and pulled a DA rear disc brake assembly off a 93 EJ1.

BTW, while we're on the subject of rear brakes, will the bearings from the drum brakes fit the disc setup?
crazyxzer0
07-11-2006, 03:28 AM
the da trailing arms are alittle different compared dc/eg trailing arms.
Volume 8
07-11-2006, 11:06 AM
not sure about the bearings, i'm leaning toward no. but don't quote me on that. and yeah, the trailing arms are slightly different from DA to DC, something about the LCAs being a different length and maybe the e-brake cables being different. but they'll still work.
lthl inj
07-11-2006, 12:39 PM
^^your right, LCAs are different and the e-brake cable are different length. Other than that they're the same. You can just use your stock LCA's. You can use rear discs off a 90-93 DA, 89-91 EF si's, 94+ teg, 92-00(not sure about the newer ones) civic that had abs.
Moe2005
07-11-2006, 07:19 PM
I pulled the setup from an EJ1 so I'm sure everything fits right.
crazyxzer0
07-23-2006, 03:07 PM
I pulled the setup from an EJ1 so I'm sure everything fits right.


I didnt say that it wouldn't fit. The geometry of the DA trailing arms is a little different. From what I've seen, it changes the camber setting.. I believe it added more camber to a car vs one with dc/eg trailing arms..