oem gsr strut bar installatioin

[wngliz]

does anyone have a oem gsr upper front strut bar on their coupe? i picked one up for cheap and later found out that there is drillin involved (since ther arent any holes) after doin a search. do any of u have info on this? also, do u feel any difference after installation?

[red4]

i've got a Cusco OS front strut bar and it bolts on just like the GSR and Si bars. there should be two small divets on the inner side of your strut towers. basically just set the bar up between the struts and try to center it on those two divets on either side. then pick up your favorite drill, drill the holes, and throw on some bolts with lock-nuts.

this is a shot i have on my computer right now, but i'll run out and take a couple more for ya in just a sec.

[G-rat]

i have one on my ej1....i had the holes already pre drilled though...but i feels like it works better than cheep ebay no name ones....plus its oem:TU:

[ronjdm36]

yeah, just like red said. line it up on the indentions and drill away! good luck with it.

[red4]

ok, here are the pics i promised. one of the things i like about my Cusco bar is that it mounts EXACTLY like the stock GSR/Si strut bar. if Honda put their bar on that way, it only makes sense to do it the same way. ;)

[JdmRevelations]

its easy... you shouldnt have any problems

[wngliz]

it seems like a fairly ez install heh
thanks everyone for the input and red for postin pics up:)

[red4]

it seems like a fairly ez install heh
thanks everyone for the input and red for postin pics up:)

no prob man. the JDMCC Shogun is always here to help. :shogun: :japanflag:

[crazyxzer0]

jeff, just get one and come on by my house and we'll drill a nice hole for ya! we just gotta go to home depot and get 4 bolts and 4 nuts.

[G-rat]

jeff, just get one and come on by my house and we'll drill a nice hole for ya! we just gotta go to home depot and get 4 bolts and 4 nuts.

dont forget to use some washers for the underside in the fender wel

[crazyxzer0]

good point garret :TU: