My ITR powered EJ1 =)

[Mashimaro]

*more updated pics on pages 4 (jdm recaros),5 (j's intake), 9 (winter-mode, new speakers, Rays lugnuts), 12 (f'd up MSD Dizzy), 14 (Koyo Rad, FAL fan, Samco Hoses)*

Hey guys and gals,

I don't have a pic of the car when i first bought it cuz it was BONE-stock..lol!
first mod was APC clear corner (ricer stage?) and didn't lower it till about 2 years later.

Pretty much went nuts in the last 1 and half (swapped out 2 motors in 1 year, and also 3 different sets of rims, 3 types of suspension too!)

Original D16Z6:


Mods weren't much:
-DC header
-Generic Short Ram (had a cold air)
-Stock exhaust!

How it looked shortly after:

-sat on JDM Sard Springs + KYB's
-Motegi MR8 (16x7")
-sold the CF hood a year ago

Months later:

-JDM B18C went in

More months later:

-Mugen 4-1 header
-JDM ITR Valvecover
-Optima yellowtop
-Greddy Catch Can + SS lines
-Buddy Club grounding kit

Suspension changed from Sard Springs/KYB's to H&R Coilovers to Tein HA's:

-Tein HA (ITR Spec)
-Skunk2 21mm sway
-Skunk2 Lower tiebar
-Skunk2 Front strut bar
-Skunk2 Front camber kit
-KVR drilled rotors and pads
-DC2 rear disc conversion

Wheel Whoring Begins (within a 8month period):
Motegi MR8:


GSR's:


Work Emotion:


Volk TE37's:




JDM Ownz me:



(installed USDM ITR Seats recently)


Currently, i swapped out the B18C and put in another B18C. A '98 Spec JDM ITR with LSD tranny (4.7FD).





Mods thus far:
-Spoon 4-2-1 header (2.5" collector)
-Apex'i WS header back system
-Toda cam gears
-Toda 8lbs flywheel
-RPS Street clutch
-J's Racing CF Intake
-Koyo Full size rad (ITR)
-FAL slim fan
-Samco Hoses

Dyno pics:






Future plans (more of this):


:)

[G-rat]

i remember this car.....engine bay looks hella clean....car seems to have come a very long way and has been around the block on its heart transplants....and the rims:eek:

[Mashimaro]

thanks bro.

yah man, lots of changes in the past year and a bit. my wings west RS sideskirts should be in next week so after that, it's most likely going to the shop to get a whole new paint job. :)

[Jspec EJ1]

wow dude nice ride.. good job keep it uP!

[Dina]

yeah I said it once and I will say it again nice looking coupe with the power to hold its own

[NtAcivG94]

and i have said this b4...without a doubt one of the cleanest, nicest coupes i have ever seen from the day i saw it on ej1oc....good job!

[JdmRevelations]

like i said before.. clean lookin EJ... and funny how the pix have the building with the name... RICE WORLD eheh.. keep up the good work

[Mashimaro]

lol, i love that RICEWORLD place!!!


thanks for the positive replies guys! I'll get an interior shot soon with my new goodies: USDM ITR seats, Momo Tuner Wheel, JDM cluster/clock/power mirror switch/climate control, and of course...the JDM roadflare! hahahahaha

[2coupes]

looks good

[Volume 8]

looks great, lovin' the TE37's .

[d16y8t]

nice car bro! the way i interpreted it, you won the lottery and had fun..lol:TU:

[boosteddx]

those wheels and your car= :TU:

[sergio.sakon]

:rockon: I bet you'r gonna have some fun with that ITR engine!!!!

[s_18@CH]

DAMN! That ride is SOOOOOO sweet! I love ALL your wheels, and the engine has got to be the best one available for our cars.
I'm sooo jealous... Rep for you man!

[red4]

awesome looking coupe man. i love the bronze TE37s against the milano red paint. you definitely need some more full-car shots up though. do you have any others you can post? :D

[Mashimaro]

haven't really taken any pics of the car recently since i'm still using 14" delsol vtec rims and snowtires...roof rack is still on too..lol! but i'll try to get around to it once the volks go back on.

glad you guys like the car so far. :jdm:

[eastmaggie]

freakin' sweet

[tuned1]

:TU: TE37's. No matter how old they are, I never get tired of seeing them. Clean ride.

[Mashimaro]

thanks guys!! :TU:

[Mashimaro]

new pics coming soon. :japanflag:

[NtAcivG94]

new pics coming soon. :japanflag:


can't wait:rockon:

[Mashimaro]

my starter motor fried...nice...pics will have to wait since i can't even get my car out of the garage at the moment..:japanflag:

[platano25]

Do u have more pics with the Motegi MR8 on? cuz i want to buy them but i wanna see what they look like on a COUPE.

[JDMej8]

very sweet. keep it up :TU:

[Mashimaro]

Do u have more pics with the Motegi MR8 on? cuz i want to buy them but i wanna see what they look like on a COUPE.

well, i'll see if i can dig them up..i think i had some..not too sure!

[queso]

EJ1 is lookin clean bro. Looks good with the volks on it

[Mashimaro]

well, i'll see if i can dig them up..i think i had some..not too sure!

sorry for the moving pic, but that's how they looked like at auto-x..(16x7's) ;)

[Mashimaro]

EJ1 is lookin clean bro. Looks good with the volks on it


thanks dood! i was debating selling the volks and going for 5-lug. run the gunmetal ITR's for a bit while saving up for some Mugen MF10's...tough call, and a LOT of money so i don't know if i'll do that or not...lol!! :japanflag:

[platano25]

sorry for the moving pic, but that's how they looked like at auto-x..(16x7's) ;)




oh man they look good on the coupe. thankx for thaT pic i'm a get them now.

[Mashimaro]

oh man they look good on the coupe. thankx for thaT pic i'm a get them now.

no worries man! for the price, you can't go wrong!

anyways, i'll get a before and after shot of my interior soon...
just picked up a set of black JDM ITR Recaros!!!! :jdm:

[Mashimaro]

some pics of the interior before i change the seats out.. :japanflag:

[G-rat]

very nice....do u have a amber clock also? cant really tell in the pics at all

[Mashimaro]

very nice....do u have a amber clock also? cant really tell in the pics at all

yuppers! it's pretty dark in the day time when you turn the lights on! :TU:

[G-rat]

ya thats how mine is to.....what are u doin with those usdm itr seats?

[Mashimaro]

they're going to sold very shortly..possibly today even! hehehe

[Mashimaro]

here are the new seats boys and girls!!

:ohsnap: :ohsnap:








and the black lug nuts of course:


:jdm: :japanflag:

[Thateguhate]

I'm jealous haha Nice setup, and choices for the exterior..

[crazyxzer0]

yay for the nice interior! be careful with the black..it fades to blue quite quick :(

[JdmRevelations]

damn i miss riding on black ITR seats.... did you sell the us ones?

[Mashimaro]

damn i miss riding on black ITR seats.... did you sell the us ones?

yup, sold them the same day i posted them up for sale.

fade to blue? WTF?! :eek:

[Dina]

any updates on this

[Mashimaro]

any updates on this

yup, got a J's Racing CF whale penis (real one) and also have a Vis CF hood sitting at the shop rite now waiting for me to pick it up. :japanflag:

[Mashimaro]

updated pics:

[Speedy]

That looks like a teg whale penis, but it's pimpalicious none the less. :TU:

[Mashimaro]

That looks like a teg whale penis, but it's pimpalicious none the less. :TU:

Good eye! It's off a DC2-R..only one that would seem to fit the R-motor... :japanflag:

[Speedy]

Yeah the dc2 dong curves slightly to the right to clear the abs...am I right?

[Mashimaro]

Yeah the dc2 dong curves slightly to the right to clear the abs...am I right?

yuppers! and it's fricken tight in my engine bay... :jdm:

[NtAcivG94]

car is lookin sick man as usual!

[Mr.MAN]

the civic whale penis will fit too tho on an itr in a ej right? cuz the civic whaale penis fits a ej with b16 and a b16 is externally the same as the itr right?

[Speedy]

the civic whale penis will fit too tho on an itr in a ej right? cuz the civic whaale penis fits a ej with b16 and a b16 is externally the same as the itr right?


The civic dong goes over the resonator hole, where air comes up via the jay's intake duct in the girll, the dc2 teg has abs and the unit is in the same location.

[CamoEj1]

:TD: Why do yall keep saying whale penis? On the cool...it's not cool.

[EJ1Rider]

Good eye! It's off a DC2-R..only one that would seem to fit the R-motor... :japanflag:

good thing they sent me the dc2 one instead of eg6 :TU: ..hahaha i plan on getting the 98+ ITR motor soon like you

o0o ya and where did u get those rims from?? i saw a silver NA1 with those rims and it looked insane, i want them on my car now

loving ur car btw :) :japanflag:

[Mr.MAN]

so my 95 eg intake will fit the ej2 with the itr powerplant?

[jdm93EJ1]

very clean! any more pics of the Emotions? I just ordered a set of bronze ones never seen them on a EJ before now! :TU: :TU:

Adam

[donut.]

woot. another itr powered ej1. niiiice. how do you like it?

[Mashimaro]

woot. another itr powered ej1. niiiice. how do you like it?

hauls donkey nuts over the D16 and even the GSR i had. the VTEC is much more noticable and louder too, but the best part is the 4.7 final drive and LSD tranny...i love it!

:japanflag:

[Mashimaro]

very clean! any more pics of the Emotions? I just ordered a set of bronze ones never seen them on a EJ before now! :TU: :TU:

Adam

i kinda miss them cuz they're nice rims, but i feel they're too "new" for the EJ1 body style....hope that makes sense!

old pics:









my friend's wheels: FORGED EMOTIONS 18" --- rare stuff


:japanflag:

[Mashimaro]

so my 95 eg intake will fit the ej2 with the itr powerplant?

i don't know if the J's EG intake would fit....it just SEEMS too tight and might not clear the shock tower...but i may be wrong cuz i didn't try it out..just based my decision on looks... good luck dood, let us know how it fits! :TU:

[jdm93EJ1]

i kinda miss them cuz they're nice rims, but i feel they're too "new" for the EJ1 body style....hope that makes sense!

old pics:









my friend's wheels: FORGED EMOTIONS 18" --- rare stuff


:japanflag:

very very nice! I cant wait to get mine in! haha I dont think they look "too new" they look good I was ton between the same two wheels u got the Emotions and the TE37s both look nice but there is just something about them Emotions that I like so much haha BTW what size did u have? I ordered 15X7 +44..

Adam

[JdmRevelations]

damn i need a set of those

[Mashimaro]

very very nice! I cant wait to get mine in! haha I dont think they look "too new" they look good I was ton between the same two wheels u got the Emotions and the TE37s both look nice but there is just something about them Emotions that I like so much haha BTW what size did u have? I ordered 15X7 +44..

Adam

the emotions i had were 16x7 with a 42offset. they would actually rub a bit if i corned too hard at auto-x...

yah, i like the look of the emotions, but they look soooooooo much better with a 0 offset car! and they're kinda heavy too...compared to the 15x6.5" volks i have now.

jdmrevelations - do it man, get a set!

[jdm93EJ1]

damn i need a set of those

I agree get a set haha jk

but yeah they look a little big and look like they wld rub...I know there alot heavier then the TE37s but IMO im feeling the Emotions more then the TE37s but still ur car looks good haha

[USciVicMC]

i wish i had $$$.....haha

[Mashimaro]

I agree get a set haha jk

but yeah they look a little big and look like they wld rub...I know there alot heavier then the TE37s but IMO im feeling the Emotions more then the TE37s but still ur car looks good haha

lol, they're not too heavy for a cast rim tho....you're looking at approx. 16lbs for a 16" which is pretty good. but it's tough to beat the 8.8lbs of the Volks...it's like you have one less person in your car! :japanflag:

[Mashimaro]

bump for October's ROTM entry!! hehehhe :japanflag:

[EJ1Rider]

lol...u'll get my vote!

[Mashimaro]

lol...u'll get my vote!

hahaha, thx bro! :rockon:

[Mashimaro]

bump for a potential October ROTM! :japanflag:

[Mashimaro]

thanks for helping me win October's ROTM guys and girls!! :japanflag:

[jdm93EJ1]

awesome u deserved it! very clean...any more plans for it? lol

Adam

[Mr.MAN]

ya whats the future hold for this beauty

[Mashimaro]

ya whats the future hold for this beauty

paint job next year and install the wings west RS sides i have sitting at the shop!

motorwise, probably Toda B's and Hondata S200. In the long run, there's a chance for ITB's or a lowboost turbo set up...haven't really decided, but i think it's better for the ITR motor to remain an NA machine. :japanflag:

[G-rat]

n/a ftw:TU:

[JdmRevelations]

congrats on the win man.. keep the car in tip top shape

[Mashimaro]

always my friend!

it's starting to get colder so i may convert the car to 'winter-mode' very soon.

so yah, mods will have to wait till next year...ITB's and a hondata S300 aren't cheap! lol!! :japanflag:

[crazyxzer0]

i would stick w/ NA. ITR motor was meant for NA!! No reason to ruin honda's true intention for that motor. Other motors that were meant to save gas...thats another story..


Keep that car in nice shape. One of my favorites on this site. Definitely gives myself some inspiration. :TU:

[buklae620]

thats a clean ass swap!

yeah a type r is meant for n/a compression is too high to run a turbo
u'd have to rebuild the whole motor with low comp turbo pistons if u wanted to run turbo.

unless u can find a blown up type r motor and rebuuild that for turbo there is a guy in my town who is running a turbo type r, it was totally rebuilt for turbo of course, he picked it up foR cheap sinec it was blown

[Mashimaro]

thats a clean ass swap!

yeah a type r is meant for n/a compression is too high to run a turbo
u'd have to rebuild the whole motor with low comp turbo pistons if u wanted to run turbo.

unless u can find a blown up type r motor and rebuuild that for turbo there is a guy in my town who is running a turbo type r, it was totally rebuilt for turbo of course, he picked it up foR cheap sinec it was blown

thanks dood!

but yah, it's possible to run a low boost turbo on a stock R-motor (i'm talking 5-6lbs max!) but it does defeat the purpose of the motor IMO. it just pisses me off how much a nice N/A build will cost... :ohsnap:

[Moe2005]

Nice coupe, looks very clean.

[Mashimaro]

thanks dood! :japanflag:

[kyle10182]

has this car been run at a drag strip? wondering what 1/4 mile times this thing would produce... i have very similar plans.

[Mashimaro]

has this car been run at a drag strip? wondering what 1/4 mile times this thing would produce... i have very similar plans.

not yet..but i'm curious to find out as well...i've been told i could possibly hit mid 13's with a good driver...so i'll probably run 25's or something. :japanflag:

however, i didn't build this car for the strip...it would be interesting to find out though, but it's not exactly 'fast'. :TU:

[kyle10182]

yea well like i said, i have similar plans. i plan to build a nice handling car, but i'll take it to the drag strip for sure. just for fun. i really dont care what it runs in 1320.

[Mashimaro]

yea well like i said, i have similar plans. i plan to build a nice handling car, but i'll take it to the drag strip for sure. just for fun. i really dont care what it runs in 1320.

yup, that was what i was after...so i hope i can hit up the 1/4 next year. :rockon:

just out of curiousity anyways..hahaha

[Mr.MAN]

any updates man? and do u have a side shot so i can see how ur sittin?

[Mashimaro]

any updates man? and do u have a side shot so i can see how ur sittin?

hmm, i'll get you a side shot today if i can...you can see my salt-coated car. :TD:

[Mr.MAN]

ha, my car is covered in ice after this sleet

[Mashimaro]

lol, posted in your other thread as well, but here's some more winter-mode pics:

[Mashimaro]

any updates man? and do u have a side shot so i can see how ur sittin?

the only new addition to the car lately (new rear speakers):



:TU:

[Mashimaro]

i don't think i posted these up either:







:jdm:

[Mr.MAN]

damn dude looks good, love the nuts lol, thanks a lot for the side pics mang

[JdmRevelations]

damn winter/snow status...

[Mashimaro]

damn dude looks good, love the nuts lol, thanks a lot for the side pics mang

no problem dood. hope it helped a bit.

jdmrevelations - werd dood...werd.... :TD:

[Mr.MAN]

ya its amazing how a simple change in tires can completely mess up the hole badass look

[Mashimaro]

ya its amazing how a simple change in tires can completely mess up the hole badass look

lol, no kidding man!

although the diameter should be the same for mine:

TE37 = 195/50/15
Snow= 195/60/14

but it looks quite different...makes my front calipers look tight with the rims too in wintermode..hahhah:TU:

[Mr.MAN]

still not bad for winter mode

[kyle10182]

lol, no kidding man!

although the diameter should be the same for mine:

TE37 = 195/50/15
Snow= 195/60/14

but it looks quite different...makes my front calipers look tight with the rims too in wintermode..hahhah:TU:
http://www.miata.net/garage/tirecalc.html

.5" larger diameter for the snow tires :TU:

thats about as close as u can get it...

[Mashimaro]

http://www.miata.net/garage/tirecalc.html

.5" larger diameter for the snow tires :TU:

thats about as close as u can get it...

wow, thanks for the link dood! good info. :TU:

[kyle10182]

wow, thanks for the link dood! good info. :TU:
yea, i've been using that miata site for a long ass time now.

[Mashimaro]

still not bad for winter mode

haha, thanks dood. i was debating if i should raise it up for the winter since i turned into a snow plow earlier this month:





LOL!!! :ohsnap:

[kyle10182]

u should buy another vehicle.

[NtAcivG94]

id raise it up as much as possible for the winter

[Mashimaro]

u should buy another vehicle.

believe me, i'd love to but i can't justify having 2 vehicles (having a sportbike is bad enough!). i'd rather buy a house if i was to have 2 vehicles even though EG's are relatively cheap to buy. ;)

i thought about doing that if i ever bought a hatch. swap all the parts around and use the EJ1 as a daily and the hatch as a track machine...

[kyle10182]

i bought a winter beater for $1800 inspected, and running like a champ:

[Mr.MAN]

believe me, i'd love to but i can't justify having 2 vehicles (having a sportbike is bad enough!). i'd rather buy a house if i was to have 2 vehicles even though EG's are relatively cheap to buy. ;)

i thought about doing that if i ever bought a hatch. swap all the parts around and use the EJ1 as a daily and the hatch as a track machine...
so are eg hatches better track cars??????
then a coupe?

[kyle10182]

so are eg hatches better track cars??????
then a coupe?
:eek:

that cannot be true!!!

[Mashimaro]

so are eg hatches better track cars??????
then a coupe?

i think they'll be better cuz if you get a CX hatchback (EG), then it will weigh a LOT less than my EJ1 at the moment. even if i was to gut out the car, it might get closer to the weight of a hatchback, but i kinda like having an interior to my car!

i also believe the wheelbase is shorter in the hatch so that could be better for handling in terms of auto-x.

kyle10182 - nice beater dood! :japanflag:

[EJ1Rider]

not true at all, Coupes kick ass, it all depends on what mods you have and what class they put you in and what type of racing you do...

iv gotten 1st in auto-x against a S2000, boosted DC2, B20vtec EG and 2 others that dropped out half way thru the event

[Mr.MAN]

but would you have done better if u had a hatch with same mods? and u driving?

[Mashimaro]

not true at all, Coupes kick ass, it all depends on what mods you have and what class they put you in and what type of racing you do...

iv gotten 1st in auto-x against a S2000, boosted DC2, B20vtec EG and 2 others that dropped out half way thru the event

you're rite about the mods and stuff but wouldn't you agree with me that in the examples of you getting 1st compared to those other cars is because of driver and not necessarily the car? :)

i've also gotten faster times than others in hatches and other 'nicer' cars, but i attribute that to me having more experience than them...

it's hard to argue with the fact that a stripped hatch will always be lighter than a stripped coupe with the exact same mods (ie: i transfer all my stuff over to a hatch)

[Mashimaro]

:eek:

that cannot be true!!!

lol, nice beater btw!

[kyle10182]

lol, nice beater btw!
thanks man. i knew i jinxed myself when i said it was running great. i got a check engine light yesterday. but i reset the ECU drove about 70 miles since, and i havent seen it yet :neutral:

[Mashimaro]

thanks man. i knew i jinxed myself when i said it was running great. i got a check engine light yesterday. but i reset the ECU drove about 70 miles since, and i havent seen it yet :neutral:

pull the code and see what it is..might be something small hopefully. :japanflag:

[kyle10182]

it was EGR (12) and Fuel Supply System (43). im not worried about 12. we'll see what happens with 43....if i dont see it again, then im fine.

[Mashimaro]

:TD:
it was EGR (12) and Fuel Supply System (43). im not worried about 12. we'll see what happens with 43....if i dont see it again, then im fine.

yah man, good luck with the code43. it's annoying how vague that code is....

[kyle10182]

yea, i've dealt with it before. and last time....it won.

[97EJ6mike]

iv gotten 1st in auto-x against a S2000, boosted DC2, B20vtec EG and 2 others that dropped out half way thru the event


That was a fun day back in august, your car kicked ass, mine wasnt far off from urs, only by 3 seconds. This season ill give you a run for the money, lol, twice the parts in there isnce last time.

[1siccej]

damn hella clean man like your set up

[Mashimaro]

damn hella clean man like your set up

thanks dood!

had some issues with MSD and their dizzy's...never going to use their products again....went back to OEM and NGK blue wires..much better again! i'll post pics of the crappy MSD dizzy soon..

[eg6sir]

Honda OEM FTW!

[G-rat]

never really liked msd...ngk wires were always good to me though:TU:

[Mr.MAN]

msd i heard pop off too

[Mashimaro]

here are some of the pics of the MSD Distributor i bought (and have returned after nothing but problems...)

nice looking unit though:


drive around for a week fine, then i heard the MSD Blender going nuts:






nothing but a TON of this came out when i removed the cap:


the 2 screws holding down the rotor weren't tightened from MSD when new out of the box...thing went nuts inside and left me stranded. :TD:

got a new cap and rotor to replace the mulched ones, but then the car would have this strange cut-off at 7500-8600rpm. not often, but enough to scare me.

i've since returned it and bought an jobber one with NGK blues instead...(for the record, Acura wanted $1000 CAD for a new dizzy...)

[Mr.MAN]

wow msd is quality i thot

[Mashimaro]

wow msd is quality i thot

i thought it would be decent as well since the Dizzy itself is 'Made in the USA'...

i guess it's kinda strong though cuz i was able to limp home with a cracked and busted cap:



on a similar note, 2 of my friends had their MSD products die on them this week alone...what a coincidence.

[Mr.MAN]

damn, sure looked good at first, it really f-ed itself up too lol

[SLVREJ8]

strange. I've had MSD products on a few of my cars(including the current one) and never had any complaints.

[Thateguhate]

wow thats gotta be dissapointing....MSD has always been a pretty reputable company.


and godamn $1000 from acura LOL! wtf!

well im not suprised.. they tryed to charge me $350 for a vtec pressure switch...:eek:

[smo_ej2]

i thought it would be decent as well since the Dizzy itself is 'Made in the USA'...

i don't want to be an asshole, but i think there's your problem ;) j/k
..it might just be bad luck. poor quality-control at the day it was manufactured.

[Mashimaro]

strange. I've had MSD products on a few of my cars(including the current one) and never had any complaints.

i'm thinking the basic MSD stuff is fine (plugs, cap rotor perhaps)...but other things like the ignition boxes and this dizzy seem to suck. granted the dizzy is a new product of theirs for the Honda, it still doesn't mean it should be poorly assembled IMO.

search MSD on hondatech..not always great things to say about their stuff...

[Mashimaro]

wow thats gotta be dissapointing....MSD has always been a pretty reputable company.


and godamn $1000 from acura LOL! wtf!

well im not suprised.. they tryed to charge me $350 for a vtec pressure switch...:eek:

yah man, $1000bux! the parts guy at Acura was laughing when he told me the price cuz he knew it was rediculous as well! he then said if i 'wanted the bottom bits and guts, it'll still be $580bux...'

that's a lot of money for dizzy bits...

[Mashimaro]

i don't want to be an asshole, but i think there's your problem ;) j/k
..it might just be bad luck. poor quality-control at the day it was manufactured.

yah man, this happened to another guy too on my local civic forum..but he had his a few months ago...same deal, screws loosened and went ape-shiet inside... :TD:

[Mashimaro]

some new parts:








My Mugen radiator cap doesn't fit the Koyo unfortunately...

black Samco hoses have been ordered already...just waiting for those. :japanflag:

[Mr.MAN]

when im do my swap im doin black samco hoses, odd that the greddy didnt fit, koyo is made in indonesio?

[Mashimaro]

when im do my swap im doin black samco hoses, odd that the greddy didnt fit, koyo is made in indonesio?

as much as i wanted the blue samco's, the blacks look more stealth under the hood and matches better.

the mugen doesn't fit cuz the Koyo requires a different type of cap (the one with a fat rubber ring). it fit my OEM one nicely, but it won't fit the Koyo...

and yah, they're made in Indonesia. :jdm:

[Mashimaro]

pics of the new toys:







:jdm:

[furi0usEX]

really good looking coupe. your engine bay is clean as hell and i like your taste in wheels man. your seats are FTW! :TU:

[Mr.MAN]

damn that engine gonna be ice cold yo

[Thateguhate]

Koyo makes an awesome radiator...you wont be dissapointed!!!:TU:

[Mashimaro]

Koyo makes an awesome radiator...you wont be dissapointed!!!:TU:

thanks for the compliments guys!

yah it's a really nice rad, runs the same as stock rite now (warms up the same) so i'm happy. i was afraid it was going to be TOO cold, but it's all good. wasn't easy putting in though!!!!

rad stays are smacking my hood rite now so i ordered a pair of Spoon rad stays since they're 1.5mm thick.

getting new tires mounted today as well...ehehehee :japanflag:

[hamburgler]

looks so such better pic by pic

[Mashimaro]

looks so such better pic by pic

haha, thanks bro!

i might be getting a hatch soon though and swapping the parts over....not sure yet. :japanflag:

[Mr.MAN]

haha, thanks bro!
pleez dont! coupe fo life mang!

i might be getting a hatch soon though and swapping the parts over....not sure yet. :japanflag:

pleez dont! coupe fo life mang!

[White93Civic]

The coupe will always look more sick! :D

[Mashimaro]

The coupe will always look more sick! :D

lol, what sucks is i have a brand new set of Wings West RS sides sitting at the shop for a coupe! dammit, not the same part number as the hatchback. :ohsnap:

[Mashimaro]

i've sold the WW RS sides for next to nothing... sad day. =*(

[Mashimaro]

hahah, i currently have a sleeper at the moment :japanflag:





muahhaha:


:jdm:

[furi0usEX]

lol, just looks funny after you moved all the parts over to the hatch minus the beast under the hood.

[PandaCoupe]

haha Shocker gap FTW :TU:


i've sold the WW RS sides for next to nothing... sad day. =*(

You're not alone I pretty much gave mine away too

[Mashimaro]

haha Shocker gap FTW :TU:



You're not alone I pretty much gave mine away too

lol!!

yah i hear ya man...sad thing is, the guy i sold them to tried to put them on a 4-door but they don't fit even though length is the same. he's trying to sell them for $250CAD now, brand new still..ouch!

furiousEX - yah man, it's a wicked little sleeper rite now ;)

[Dina]

any updates on this?