PDA

View Full Version : Clutch pressure problem


EJ1Rider
08-28-2008, 06:59 PM
went to bleed the clutch and the pedal isnt getting pressure, we bled it a few times and theres no air in the clutch line....but the pedal isnt doing ne thing

what else am i missing here??? why wont it get any pressure?


i had to replace the clutch hard line on the fire wall cause the a-hole thieves took that also, im thinking they took something else that was inside the car?

help me out fellas :TU:
Volume 8
08-28-2008, 08:57 PM
So the pedal goes to the floor and doesn't return??
EJ1Rider
08-28-2008, 09:27 PM
So the pedal goes to the floor and doesn't return??

yupp...

10 char
foff158
08-29-2008, 12:29 PM
change the slave cylinder and if that dont work change the master....
Speedy
08-29-2008, 01:39 PM
theres either a leak or you didnt blead it enough.
foff158
08-29-2008, 01:49 PM
is the car drivable or there is no pressure at all?
EJ1Rider
08-29-2008, 02:27 PM
none at all
foff158
08-29-2008, 04:09 PM
is the rubber line any good? i would start there and then work your way to the slave and then the master if still no pressure...i had pressure problems and i replaced both the slave and master...it fixed everything after that!
97EJ6mike
08-29-2008, 05:43 PM
Master Cylindar itself may be shot if its not the slave cylindar.

Also, you could have the "gourley" situation if you did not put on a new clutch, and are using the one that came with it. God knows what condition that is in.
EJ1Rider
08-29-2008, 08:02 PM
Master Cylindar itself may be shot if its not the slave cylindar.

Also, you could have the "gourley" situation if you did not put on a new clutch, and are using the one that came with it. God knows what condition that is in.

im using speedys clutch that he said had about 12,874 km on it
Speedy
08-29-2008, 08:24 PM
random number much? i put about 6k miles on it w/ the cx trans...

so again, let me rephrase...or not...you either havent bled it enough and theres air in the line or you have a leak
-maybe you didnt tighten a joint enough
-maybe the slave cylinder or master cylinder is shot, both would result in a loss of fluid and a lower lever in the reservoir.
EJ1Rider
08-29-2008, 10:07 PM
actually if u convert the # i posted, it equals 8000 miles - i thought thats about what you told me, sorry im trying the asian way

and i guess ill check all the joints again and slave
97EJ6mike
08-29-2008, 10:22 PM
Check under the dash again, make double sure its not lossing fluids up top by the pedal.
If not, either me or speedy has an extra slave cyl lying around... i think?