would a GSR/ITR tranny fit a B16A???

[j_unit22785]

just wondering if a ITR/GSR tranny would bolt up to a B16A motor.... much help appriciated!! thanks...............


******* ALSO WHATS BETTER TO USE IN A TRANNY???? GEAR OIL OR MOTOR OIL???????????*******

[97EJ6mike]

All hydrolic B-series trannys are interchangable. This means all 94-01 integra, or OBD1+ b16's (jdm) and Usdm 99-00 Si trannys.

The cable ones are the same as well, but require a cable shifter setup on the car.


Best fluid would be honda OEM manual tranny fluid. Its best for a stock transmission. If its built internally, then thats a different story. ( use things like Royal purple gear oil)

[j_unit22785]

thanks mikey only because a friend of mine is asking where i work.... thanks!

[lastresort576]

oem honda fluid is what i run and im happy with it. but itll wear out if you do alot of track days...motul would be the next fluid i would use.

[Volume 8]

Yeah it will bolt right up. MTF is good but the new stuff is kinda thin, 10w30 is fine for older trannies and it's cheaper. Never use gear oil, like 80w90 or you'll ruin your tranny. Trust me I can speak from experience.

[j_unit22785]

Yeah it will bolt right up. MTF is good but the new stuff is kinda thin, 10w30 is fine for older trannies and it's cheaper. Never use gear oil, like 80w90 or you'll ruin your tranny. Trust me I can speak from experience.

so Lionel would you suggest I use 10w30 motor oil for my tranny??? Cause honestly on all my 5-speed cars I had, I only used motor oil and never gear oil.... I never had a problem with it... Some people say it is better anyways for older cars like you said...

[Speedy]

i use honda mtf only...makes everything run that much better. i change it often because its so damn thin