gauges

[Green95Eg]

I was looking at one of my issues of super street and at the back there was a yellow eg featured and he had a gauge cluster out of a dc. has anyone tried this or know if it just plugs in or what?

[danomatic93]

To get the DC cluster in your EG dash, you'll need the pigtails from the DC cluster so that you can either splice the wires or de-pin your stock pigtail and re-pin the DC cluster.

So, it's just a little bit or rewiring involved, oh, ans a little finesse to get the DC cluster situated properly. I'll look for the pin diagrams for converting EG to DC.

[danomatic93]

Here's one:

http://honda-tech.com/zerothread?id=1053318

And another:
http://www.geocities.com/cinq112/gsrclusterswap.html

[Green95Eg]

thanks guys

[Volume 8]

To get the DC cluster in your EG dash, you'll need the pigtails from the DC cluster so that you can either splice the wires or de-pin your stock pigtail and re-pin the DC cluster.

So, it's just a little bit or rewiring involved, oh, ans a little finesse to get the DC cluster situated properly. I'll look for the pin diagrams for converting EG to DC.

What he said^^^, I have one in my EJ2 and in my girl's EJ8.

[94exa2]

so it IS possible to put a dc2 gsr/itr(usdm or jdm) gauge cluster in an ej1!yay!:omfg:

[danomatic93]

LoL, anything is possible if you really want to do it.

btw... Here's a detailed DIY I recently wrote up: http://www.jdmcoupecouncil.com/forum/showthread.php?t=7059