View Full Version : My Ek Coupe
semij20
05-03-2006, 08:06 PM
well i decide to take a few pics i was bored and i also cleaned up the engine a little bit look better well i think so.
Pics On Page 1, 3, 6, 7, 8, 9
Here are the mod i have on it
Exterior:
2000 Front end
JDM fog lights
apexi WS knock off Exhaust
Si Rear Tail Lights
Jdm Antenna Block Off Plate
Ctr Style HeadLights
Xenon 8000k Hids
Ls Webs Wheels
VIS CF Trunk
Interior:
Jensen Indash Flip Out Tv all in one dvd/ mp3/ wma etc etc
Sony Xplodes Front and Rear Speakers
Si Cluster
CTR Shift Knob
CTR Shift Boot
Momo Quick Release Steering Wheel
AutoMeter Cluster dual Gauge Pod
AutoMeter C/F Air/Fuel Gauge
AutoMeter C/f Boost/Vac Gauge
Suspension:
KYB G2 Shocks
Skunk 2 lowering racing Springs
Ractive Lower Rear Strut Bar
Ractive Upper Rear Strut Bar
Ractive Upper Front Strut Bar
Brembo All around Brake Rotor
Engine:
97 JDM B20B ls Motor
Custom Spark Plug Covers
97 Gsr Transsimission
Act Stage 3 Clutch
Fidenza 8lbs Flywheel
Skunk 2 Intake manifold
Skunk 2 Throttle Body 68mm
DC 4-2-1 Headers
Red Whale Penis Intake
NGK Spark Plugs
Converted to OBD-1
P75 ECU
Spoon Cover
semij20
05-03-2006, 08:09 PM
lmk what u guys think of it i know i need rims , lips and a paint job
JdmRevelations
05-03-2006, 08:17 PM
not a bad start...but like you said... some wheels would make a HUGE diff... but we cant have it all so.... keep us updated...
semij20
05-03-2006, 08:36 PM
yea im gonna drop some hx wheels then polish the lip and paint it red
Looks good! Looks like your front bumper is coming off or something. but all in all its a good start. I would clean up that engine bay and hide some of those wire's.
How did you hear of us?
semij20
05-03-2006, 09:08 PM
thru jdmcasnova
queso
05-03-2006, 10:06 PM
hx wheels would look clean on there, keep us updated bro
G-rat
05-03-2006, 10:12 PM
looks good....keep it up
2coupes
05-14-2006, 10:21 PM
good start!
jdmcasanova
05-17-2006, 01:31 PM
nice pics jr....................
semij20
05-22-2006, 09:07 PM
nice pics jr....................
thanxs josh
Jspec EJ1
05-22-2006, 11:26 PM
nice ride all u need is rims! good start though :TU:
Nice engine transplant. I see you went for performance first. As far as the exterior goes, I would say get your front bumper fixed so it fits better, remove the pinstirpe, paint your driver door to match, CTR headlights and like everyone else said...some wheels. Those would be some future plans I would suggest.
Other than that it looks like a great start. Oh, and your tail lights are from all 99-00 Civic coupes, not just Si's just to let you know.;)
Moe2005
05-23-2006, 06:22 PM
Looks like a great start. What part of Florida are you from?
semij20
05-23-2006, 09:53 PM
ft lauderdale
semij20
05-26-2006, 07:10 PM
updated pic i got new wheels on there . put hx's and repainted them red with a polish lip
G-rat
05-26-2006, 07:16 PM
those hx's look nice.....what kinda paint did u use cause im lookin to re spray my rims black
semij20
05-26-2006, 07:51 PM
thanx bro they were gunmetal be4 took me hours to strip the paint. i use 500 degree paint
131maxSi
05-27-2006, 10:48 AM
Just my advice, but lose the gauge bezel and the foglight switch is in the wrong hole! It's the small shit that I am picky about!
jdmcasanova
05-29-2006, 03:11 AM
u faggot ,,,,, tell every one who gave u those paint skillz ;)
boosteddx
05-29-2006, 03:21 AM
sorry but those rims look kinda awful to me...but i in truth i hate those gab or rotas whatever in red....
jdmcasanova
05-29-2006, 03:44 AM
sorry but those rims look kinda awful to me...but i in truth i hate those gab or rotas whatever in red....
thats coming from somebody who rocked this ^^^^^^...wow....
semij20
05-29-2006, 09:50 PM
lol................................
semij20
05-29-2006, 09:51 PM
and yea jdm casnova did teach mehow to paint rims
semij20
07-25-2006, 08:14 PM
yea my vlack coupe got stolen on the toyko drift movie opening and just got it back last week. they stole my rims, gauge, system and my ecu with jumper i bought a red ek hx coupe and i tranfer the motor, exhaust, tail lights, rear disc conversion and the suspension. and i bought a 2000 si frontend already red and bought jdm fog, complete quick release steering wheel,,and a new alarm. here are pics of
semij20
07-25-2006, 08:19 PM
Moe2005
07-26-2006, 12:02 AM
New coupe is lookin good. How long did it take for you to swap everything from the black car to the red?
Mr.MAN
07-26-2006, 12:09 AM
dude that is cool, arer those ar wheels lol
semij20
07-26-2006, 08:48 PM
New coupe is lookin good. How long did it take for you to swap everything from the black car to the red?
13 hr to swap the hx motor out and put it in the black and take out the ls out of the black one and then put it in my red car it took my whole saturaday day and i also swap the rear disc and suspension that same day
semij20
07-26-2006, 08:49 PM
dude that is cool, arer those ar wheels lol
god!!!!! i hate those white rims they came with the car i have no steelie so i cant switch im dyin to fine some steelie to stick on there
new coupe is looking good man. loving the red paint! :D nice job on swapping all the parts over. :TU:
semij20
07-26-2006, 09:28 PM
new coupe is looking good man. loving the red paint! :D nice job on swapping all the parts over. :TU:
thanx alot, ima rip ur sig and put my name ight i finally found one with the same color car as mine
semij20
07-28-2006, 12:49 AM
just bought a si cluster today ill post picks soon
JdmRevelations
07-28-2006, 12:53 AM
post em pix asap...
Moe2005
08-07-2006, 08:11 PM
Looks good. The only things I don't really like are the painted center console and the rear badge. Other then that it looks good.
semij20
08-07-2006, 08:13 PM
Looks good. The only things I don't really like are the painted center console and the rear badge. Other then that it looks good.
like i said the paint inside and the rear bage was done by the perious owner my friend i order ther new center coucole im waitin in shippin but yea i hate it too but hey y friend was the ricer
Mr.MAN
08-07-2006, 08:59 PM
looks good, but isnt this already on the site somewhere else?
G-rat
08-07-2006, 09:06 PM
lookin good....just take car of those 2 things like moe said it will look mint
CamoEj1
08-07-2006, 09:13 PM
I like the grill to son, real fresh whip.:TU:
semij20
08-07-2006, 09:52 PM
thank every1 on the comments
NtAcivG94
08-07-2006, 09:54 PM
looks pretty clean man...got any future plans for it?
looking good so far and you've got some nice plans figured out. gonna look a lot better with the new center console. how does the car feel with that B18B1 in there? i should be picking mine up in the next couple of weeks. :TU:
JdmRevelations
08-07-2006, 10:02 PM
nice work man... please dont create new threads.... just update your old one.. i merged both threads...
semij20
08-07-2006, 10:06 PM
theast e was about my black and th new one was about th red one
semij20
08-07-2006, 10:07 PM
looking good so far and you've got some nice plans figured out. gonna look a lot better with the new center console. how does the car feel with that B18B1 in there? i should be picking mine up in the next couple of weeks. :TU:
feels good as hell
JdmRevelations
08-07-2006, 10:08 PM
one build thread per member.... sorry...
singlecamEJ8
08-10-2006, 01:05 AM
looks good :TU:
semij20
08-10-2006, 10:13 PM
thanx alot
semij20
08-11-2006, 07:00 PM
Just a few things , nothing big just a antenna block off , spoon covers, a sticker, and a jdm tow hook when i get all in i will post pic ill keep you updated
semij20
08-14-2006, 05:32 PM
i just a few items in today and installed them
here i got the jdm antenna Block Off Plate
here i got spoon covers
here i got my recaro cell phone holder
semij20
08-15-2006, 11:57 AM
here is a picture of my new front lip
here is a pic of my no rice sticker and behiind it is my jdm elder driver badge
00si_guy86
08-15-2006, 12:19 PM
how is the recaro cell phone holder?? What kinda phone do you use with it?? any feedback would be appreciated!
jdm93EJ1
08-15-2006, 12:33 PM
not feeling the lip hell I dont like the lip on any car lol other then that the car looks great I need to get a antenna block off plate my antenna dont even work haha!
Adam
semij20
08-15-2006, 12:35 PM
how is the recaro cell phone holder?? What kinda phone do you use with it?? any feedback would be appreciated!
its nice i like i have a sprint flip phone
00si_guy86
08-15-2006, 01:11 PM
k cool, cause I bought mine the other day. Just wanted an opinion. Thanks.
aemboy15
08-15-2006, 02:17 PM
Looking good dude. Keep us updated.
semij20
08-15-2006, 06:37 PM
Looking good dude. Keep us updated.
thanx alot. i will as i go
EJcoupe-T
08-15-2006, 10:16 PM
not feeling the lip hell I dont like the lip on any car lol other then that the car looks great I need to get a antenna block off plate my antenna dont even work haha!
Adam
anything's better than a damn SI lip. PLAYED OUT. i would have left the 96-8 front on it and thrown a factory CTR lip on it. mmmmmmm. looks good though.
semij20
08-17-2006, 10:39 PM
just got my new headlight in will take pic tomnrrow
CamoEj1
08-17-2006, 11:11 PM
I like the lip I dont know what ol'boys talkin bout'.
boosteddx
08-17-2006, 11:15 PM
not feeling the lip hell I dont like the lip on any car lol other then that the car looks great I need to get a antenna block off plate my antenna dont even work haha!
Adam
but u love the lip on my car though
semij20
08-18-2006, 10:33 AM
here are pix of my new headlights
JdmRevelations
08-18-2006, 12:58 PM
headlights compliment the grill and front lip
semij20
08-19-2006, 02:56 AM
Took some pictures today with a couple of my friends car too
semij20
08-23-2006, 10:52 PM
here is pic of my ctr shift boot and also i finally change the center council to the oem one and not that red thing
and her is my ls spark plug cover. this is a new item that only one person makes it
Mr.MAN
08-23-2006, 10:54 PM
looks awesome man
new pictures are looking good man. the headlights are awesome. i would think about painting the center grill section of your bumper black though. i think that would really pull together the look of the front end.
i like that wire cover too. who makes it? also, do you know if that style valve cover will fit on an OBD1 B18B?
G-rat
08-23-2006, 11:14 PM
i agree with mike on this one....paint the grill on the mottom black and it will look mint.....but new lights are lookin good.....nice front plate btw...i got one also
Sctcivicem!
08-23-2006, 11:16 PM
1996-2000 Coupes Ftw!!!
Mr.MAN
08-23-2006, 11:18 PM
woooooohoooooo i am pumped!:eek:
G-rat
08-23-2006, 11:21 PM
oh and i forgot to ask....u gettin some rims in the futere cause some black rims would compliment your black on red theme very nicley.....my color theme is similar just blue instead of red:D
semij20
08-23-2006, 11:26 PM
new pictures are looking good man. the headlights are awesome. i would think about painting the center grill section of your bumper black though. i think that would really pull together the look of the front end.
i like that wire cover too. who makes it? also, do you know if that style valve cover will fit on an OBD1 B18B?
no it only fit newer ls valve cover and b20 valve considering its the same valve cover
semij20
08-23-2006, 11:27 PM
oh and i forgot to ask....u gettin some rims in the futere cause some black rims would compliment your black on red theme very nicley.....my color theme is similar just blue instead of red:D
im working on that but cant find a decent set or price
semij20
08-23-2006, 11:30 PM
looks awesome man
thanx for the comment :TU:
semij20
09-25-2006, 12:10 PM
i havent been on here for a while just been work well i havent done except bought a skunk2 throttle body 68 mm and boought a new flip out tv thats it ill post pics up asap
semij20
10-18-2006, 05:10 PM
i havent been on here cause i blew my ls motor and then the psitons hit the valve and bent it so i didnt want to try to rebuilt it so i decidded to go a little bigger and picked up a jdm b20 motor
here is a pic of my broken timing belt
Here is a pic of my new motor
here are pics of doing the swap and swaping parts it to the new motor
here is the motor in the car and purring like a kitten
Lazysk8r2
10-18-2006, 07:23 PM
whats the red thing on the intake filter?
singlecamEJ8
10-18-2006, 08:38 PM
nice.
where did you get the spark plug cover? my boy has been trying to find one for his 98 LS
PandaCoupe
10-18-2006, 08:40 PM
Looking good :TU:
Hahaha, motor was riding shotgun with you I see.
A new transplant is always good.
semij20
10-19-2006, 01:18 PM
Hahaha, motor was riding shotgun with you I see.
A new transplant is always good.
hell yea forget a pick up or truck take out my friends front seat and strap it in
snailD16
10-19-2006, 01:51 PM
nice setup you got goin
Moe2005
10-19-2006, 08:31 PM
Nice, how's the power on the B20?
semij20
10-20-2006, 12:01 PM
OMG!!! It Pulls SOOOOOOOOO Smooth i love it so much better then the ls motor
semij20
12-13-2006, 05:28 PM
i know its been a long time i posted here but i been busy but add quite of few things on my car
i put on all around rotors rear and front , i put on ls webs wheels, xenon hids 8k high's and low bulbs, new intake and new 4-2-1 dc headers here are pics of it
here are two pics one of the front and one of the rear
here is a pic of the H.I.D's
here is a pic of the new intake and headers
PandaCoupe
12-13-2006, 07:59 PM
Man I loooooove those rims :TU:
Its looking good, you should paint your grill red and your lip black though
semij20
12-13-2006, 11:12 PM
Man I loooooove those rims :TU:
Its looking good, you should paint your grill red and your lip black though
thanx make i am goin to paint it
semij20
01-15-2007, 05:48 PM
The New Added Toy On My Car Cost Me a Arm and Leg
(VIS Carbon Fiber Trunk)
Mr.MAN
01-15-2007, 06:17 PM
looks sick man, i have a Q how did u install the b20 i can only find engines with out trannies what tranny and mounts did u use also what axles?
semij20
01-15-2007, 06:57 PM
thanks
i used a gsr tranny n stock mount if you puttin in a eg or ek you gotta change the driver side upper bracket with a 00 side barcket so you can use the stck driver side mounts and the rest should work fine
semij20
01-15-2007, 07:09 PM
i also used 94-01 gsr axles
JdmRevelations
01-16-2007, 01:36 AM
car is shapping up man... keep up the good work
semij20
01-16-2007, 08:58 AM
car is shapping up man... keep up the good work
thanx alot
semij20
04-06-2007, 10:21 PM
nothin new done to the car all i did is fully built the a ls head with crower valve, valve springs and retainer and also put stage 2 crower cams with skunk2 cam gears and also did a port and polish job thats it for now been tight on money and oh yea i also order a oem c/f hood in may ill be paintin my car
semij20
05-22-2007, 05:58 PM
well here is an up date i converted the climate control from a 96 - a 2000 and took out my flip out tv and put a double din and i got my c/f hood
semij20
05-22-2007, 08:27 PM
semij20
07-22-2008, 11:05 AM
well guys its been over a year since i posted. the update is i sold the coupe and i bought a ek hatch ( i know you all are like WHY!!!!!) but i got a good deal so i had to get here is the progress i made on it (btw i have a poor mans type r in it )
well i bought the car in Jan. of this year. I've been working on car for over 8 years and learning from others. this is my favorite car so far and i work on it as much as i can because I'm working or going to school its hard to work on it. well her are pic of the build and ill add more ask i get more stuff added.
Jan 20. 2008. this is how i bought the car. i added the carbon fiber hood, the ctr style black housing headlights and the rims. i dont have pics before that.
Feb. 09 2008. i decided to do the 96-98 to 99-00 A/C Climate Control conversion. the conversion took about 2 hours with a help of a friend. I also did the power window/lock conversion did my self which took about 7 hours. i have no pics of doing the power just the before and after
the old setup.
when the dash was off and the new ac boxes on
the new setup. power windows and lock with the 2000 dash and the double din pioneer navi. you can also see the the ctr shift boot, s2000 shift knob,and si cluster
Mar. 03 2008. i got the car painted milano red. the car had a blue back bumper , black front bumper and well the red was faded as hell. i decide to leave the side molding, the mirror, and the side skirt black because i like the red and black theme. the mirror are going to be replace with carbon fiber spoon replica. i also put 00 civic tail lights
here are pic's of what the car looks
so i got a few parts in and took a few pics of it nuttin big
I got spoon style C/F DuckBill
Some Si/Ex Tweeters
Cluster Pod With a Electric Fuel Pressure Gauge And Air/Fuel Gauge
C-Pillar & B-Pillar Bars
Got Some Ploy. Mounts My were Bad so had to replace them
June 23 08
fed ex came to today and deliver a package :laugh: i wonder what could it be :001_unsure:
:w00t: its my aluminum Light Weight Radiator :hurray::thumbup:
June 26 08
I bought an AEBS Typhoon Intake Manifold and decided to install it because my stock manifold was holding me back
im installing my new radiator also
July 1 2008
i got different seats for the car. i think its give a nice touch to the car
thats all the update i got for now
JPCoop
07-22-2008, 02:25 PM
Looks clean, lip it then you're cool
:TU:
JDM95VIC
07-22-2008, 02:36 PM
Looks good keep it up!!
Hatch is looking good. I'm jealous of your seats. Couple questions, where did you get them? New or used? How much?
semij20
07-22-2008, 05:52 PM
theyre use and i got them thru a friend and i got them thru a trade
Nice. I hope to get my hands on some of those seats one day.
mportedcivicsi
07-23-2008, 06:30 PM
Looking really good, while I'm a coupey I dig the hatch as well! You going to pick up a c/f front lip to go w/ the black/ red theme and to go w/ the c/f parts you already have? How about fogs, any plans?
semij20
07-23-2008, 06:48 PM
i have a black lip on it now but about the fogs im still debating on it in time ill firgure its out. but thanx every1 for the good remarks
Slammed EM1
08-02-2008, 03:07 AM
hey your in miami right??
semij20
08-02-2008, 01:35 PM
nope im in north broward
Slammed EM1
08-05-2008, 02:38 AM
nope im in north broward
haha den now i know from where i remmeber you from....FHC!! i posted in tyour build up thread...
Powered by vBulletin™ Version 4.0.1 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.